Metal fabrication & welding
Turn raw steel into built-to-spec work.
Forge & Frame fabricates and welds custom metalwork: parts, frames, architectural pieces, repairs, and formed sections, made to the requirements you bring.
Forge & Frame · Fig. 01Library photograph · Mark HunterIllustration only · NTS
Capabilities
Practical shop work
Material, fit, and finish are settled with you on each job.
- 01
Custom fabrication
DetailsParts and assemblies made from a sketch, a model, or a clear description of how the piece has to fit.
- 02
Welding
DetailsSteel sections joined into brackets, frames, and other assemblies, from small fittings to larger built-up work.
- 03
Structural metalwork
DetailsFrames, supports, stairs, rails, and similar pieces laid out to the dimensions of the place they will live.
- 04
Architectural metalwork
DetailsVisible metal such as screens, trims, canopies, and edge details, where alignment and finish are part of the job.
- 05
Repair & modification
DetailsStraightening, rebuilding, and altering existing metal so it works with what you already have.
- 06
Cutting & forming
DetailsStock cut to length, and plate or bar formed into the shapes a job needs.
Selected work
How a job can be described
Illustrative spec sheets: example compositions for how a job can be described. Not a record of Forge & Frame projects.
Mezzanine guardrail bay
A straight run of railing with posts, a top rail, and a mid-rail for an interior edge.
- Material
- Steel tube and flat bar
- Finish
- Joints ground flush, uncoated
- Application
- Interior edge guard
Doorway canopy frame
A tube frame with two posts and a short overhang, meant to carry a light cover over an entry.
- Material
- Square steel tube
- Finish
- Mill surface, ready for coating
- Application
- Architectural shelter
Equipment base rebuild
A worn mounting plate replaced with a new one, holes laid out so existing equipment can bolt back down.
- Material
- Steel plate
- Finish
- Edges deburred
- Application
- Repair and modification
Materials & finishes
Settled with you, job by job
The example sheets show the kind of material and finish a job can name.
Material
- Steel tube
- Flat bar
- Square steel tube
- Steel plate
Finish
- Joints ground flush, uncoated
- Mill surface, ready for coating
- Edges deburred
How to ask
Three things to bring
Describe the job
What you need built, repaired, or modified.
Add the details
Material, approximate size, where it will live, and any constraints you already know.
Attach a reference
A drawing or reference file is optional: PDF, DWG, DXF, or a common image.
Quote sheet
Request ready
This quote request was not sent.
It is prepared on this page only. This demo has no server, so nothing was transmitted or stored.
- Name
- Project type
- Attachment
- Description